US Conec MTP Connector with Optimal 0.35dB Low IL
Bend Insensitive Fiber with 7.5mm Min. Bend Radius
8° APC Endface Minimizes Optical Reflections to Improve Signal Quality
OFNR/LSZH Combats Fire and Toxic Smoke in Riser Pathways
Designed for Linking 800G QSFP-DD and 400G QSFP-DD/OSFP Transceivers
Convert from 16 to 8 Fibers for 100% Fiber Utilizations
Compliant to IEC 61754-7, ANSI/TIA-604-5 and ANSI/TIA-568.3-D
MTP Breakout Cable, MTP-16 F APC to 2 x MTP-8 F APC, 16F, OM4, OFNR/LSZH, Crossover
The MTP-16 to 2 x MTP-8 OM4 cable is a multimode splitter fiber cable, whose MTP-16 APC end has an 8-degree polished angle to deflect internal optical back reflections from entering the transceiver and distorting the signal quality.
It is designed for linking two 400G optical QSFP-DD/OSFP transceivers transmission to 800G optical QSFP-DD transceiver transmission in data center high-speed fiber links. Compared to purchasing and installing separate breakout cassettes, using MTP breakout cables is more cost-effective and lower-loss.
| Connector A | US Conec MTP®-16 Female (Pinless) APC with Offset Key | Connector B | US Conec MTP®-8 Female (Pinless) APC |
| Fiber Mode | OM4 50/125μm | Wavelength | 850/1300nm |
| 400G Ethernet Distance | 50/100m at 850nm | 800G Ethernet Distance | 50m at 850nm |
| Glass Fiber | Bend Insensitive Fiber | Polarity | Crossover |
| Insertion Loss | ≤0.35dB (0.15dB Typ.) | Return Loss | ≥45dB |
| Cable Jacket | Dual Rated (OFNR/LSZH) | Minimum Bend Radius | 7.5mm |
| Attenuation at 850nm | ≤2.3dB/km | Attenuation at 1300nm | ≤0.6dB/km |
| Cable Outside Diameter (OD) | 3.0mm | Breakout Length | 0.5m |
| Installation Tensile Load | 66N | Tensile Strength | 60/120N (Long/Short Term) |
| Operating Temperature | -10 to 60°C (14 to 140℉) | Storage Temperature | -10 to 70°C (14 to 158℉) |
