Home >> Products >> Fiber optic patch cable

1m (3ft) MMC Breakout Cable, MMC-16 APC (Female) to 2 x MTP-8 UPC (Female)

16 Fibers, Multimode (OM4), Plenum (OFNP), 0.35dB Max, Jumper Polarity, Magenta
VSFF MMC Connector Supports 3x Cabling Port Density over the MPO Format
Utilizes Proven MT/MT-16 Mechanical and Fiber Alignment Structures

ify Installation and Maintenance

Utilizes Proven MT/MT-16 Mechanical and Fiber Alignment Structures

DirectConec™ Push-Pull Boot for Effortless Connector Insertion and Extraction

Aggregating 2x MTP®-8 into an MMC-16 to Save Space and Network Reliability

TMT Elite™ Enable 0.35dB Low IL and APC for Superior Return Loss

Tested to Telcordia GR-1435

Support Data Center Structured Cabling and High-Bandwidth Applications


MMC-16 to 2 x MTP®-8 Breakout Cable, F to F, APC to UPC, 16F, OM4, OFNP, 0.35dB, Jumper Polarity

The MMC fiber cable is equipped with an MMC connector, a Very Small Form Factor (VSFF) multi-fiber optical connector designed to terminate single-mode and multimode fiber cables up to 2.5mm in diameter. It employs novel TMT ferrule technology harmonized with the MT/MT-16 alignment structure. Individual connector access in the most extremely dense connector environments is easily accomplished using revolutionary DirectConec™ push-pull boot technology.


The breakout cable aggregates multiple MTP®-8 connectors into an MMC-16 connector, streamlining infrastructure and helping optimize both space and network reliability. Therefore, MMC connectivity enables solutions that minimize the space required across multiple applications, including structured cabling, high fiber count data center interconnects, and high-bandwidth applications.

Connector AUS Conec MMC Female (Pinless)Connector BUS Conec MTP® Elite Female (Pinless)
Polish TypeAPC to UPCGlass FiberBend Insensitive Fiber
Fiber ModeOM4 50/125μmWavelength850/1300nm
Fiber Count16 FibersPolarityJumper Polarity
Cable Outside Diameter (OD)2.5mmCable JacketPlenum (OFNP)
Min. Bend Radius (Optical Fiber)7.5mmMin. Bend Radius (Fiber Cable)20/10D (Dynamic/Static)
Tensile Strength (Long Term)30NTensile Strength (Short Term)100N
Insertion Loss≤0.35dBReturn Loss≥40/27dB (MMC/MTP®)
Attenuation at 850nm≤3.5dB/kmAttenuation at 1300nm≤1.5dB/km
Operating Temperature-10 to 60°C (14 to 140℉)Storage Temperature-10 to 70°C (14 to 158℉)


Inquiry now
*Your Name :
* Phone :
Email :
Content:
Related Products