US Conec MTP Connector with Optimal 0.35dB Low IL
G.657.A1 with 10mm Min. Bend Radius
Helical Steel Armor Provides Additional Crush and Rodent Protection
Available in 8, 12, 24, 36, 48, 72, 96 and 144 Fiber Counts
Available in Plenum (OFNP) and LSZH Cable Jackets
Available in Female (Pinless) and Male (Pinned) Connectors
Available in Type A, Type B, and Type C Polarities
Available in Pulling Eye to Prevent the Cables from Twisting During the Installation Process
Typically Used for Routing Indoor Including Data Center Racks, Raised Floors and Runs Between Floors
Compliant to IEC 61754-7, ANSI/TIA-604-5 and ANSI/TIA-568.3-D
Customized MTP-12 Armored Jumper, 8-144F, OS2, 0.35dB
Armored fiber optic cable with build-in metal armor can provide stronger protection of the optical fibers than standards fiber optic cables. The rugged armored cables allow optical fiber to be installed in the most hazardous areas, including environments with slight dust, oil, gas, moisture, or even damage-causing rodents and pests.
| Connector A | US Conec MTP® Elite Female/Male | Connector B | US Conec MTP® Elite Female/Male |
| Polish Type | APC | Glass Fiber | G.657.A1 |
| Fiber Mode | OS2 9/125μm | Wavelength | 1310/1550nm |
| Trunk Outside Diameter (OD) | 6.0mm-29.5mm | Cable Jacket | Plenum (OFNP)/LSZH |
| Fiber Cords Structure | Single Armored, Stainless Steel Tube | Minimum Bend Radius | 10mm |
| Insertion Loss | ≤0.35dB | Return Loss | ≥60dB |
| Attenuation at 1310nm | ≤0.36dB/km | Attenuation at 1550nm | ≤0.22dB/km |
| Operating Temperature | Plenum (OFNP): -10 to 60°C (14 to
140°F) LSZH: -10 to 70°C (14 to 158°F) | Storage Temperature | Plenum (OFNP): -10 to 70°C (14 to
158°F) LSZH: -20 to 70°C (-4 to 158°F) |
