ify Installation and Maintenance
Utilizes Proven MT/MT-16 Mechanical and Fiber Alignment Structures
DirectConec™ Push-Pull Boot for Effortless Connector Insertion and Extraction
TMT Elite™ Enable 0.35dB Low IL and APC for Superior Return Loss
Tested to Telcordia GR-1435
Support Data Center Structured Cabling and High-Bandwidth Applications
MMC-16 to MTP®-16 Jumper, F to F, APC, 16F, OS2, OFNP, 0.35dB, Jumper Polarity
The MMC fiber cable is equipped with an MMC connector, a Very Small Form Factor (VSFF) multi-fiber optical connector designed to terminate single-mode and multimode fiber cables up to 2.5mm in diameter. It employs novel TMT ferrule technology harmonized with the MT/MT-16 alignment structure. Individual connector access in the most extremely dense connector environments is easily accomplished using revolutionary DirectConec™ push-pull boot technology.
MMC connectivity enables solutions that minimize the space required across multiple applications, including structured cabling, high fiber count data center interconnects, and high-bandwidth applications.
| Connector A | US Conec MMC Female (Pinless) | Connector B | US Conec MTP® Elite Female (Pinless) |
| Polish Type | APC to APC | Glass Fiber | G.657.A1 |
| Fiber Mode | OS2 9/125μm | Wavelength | 1310/1550nm |
| Fiber Count | 16 Fibers | Polarity | Jumper Polarity |
| Cable Outside Diameter (OD) | 2.5mm | Cable Jacket | Plenum (OFNP) |
| Min. Bend Radius (Optical Fiber) | 10mm | Min. Bend Radius (Fiber Cable) | 20/10D (Dynamic/Static) |
| Tensile Strength (Long Term) | 30N | Tensile Strength (Short Term) | 100N |
| Insertion Loss | ≤0.35dB | Return Loss | ≥60dB |
| Attenuation at 1310nm | ≤0.4dB/km | Attenuation at 1550nm | ≤0.3dB/km |
| Operating Temperature | -10 to 60°C (14 to 140℉) | Storage Temperature | -10 to 70°C (14 to 158℉) |
