US Conec MTP Connector with Optimal 0.35dB Low IL
Bend Insensitive Fiber with 7.5mm Min. Bend Radius
LSZH Flame Rating for Horizontal Structural Cabling Areas
Available in 12, 24, 48, 72, 96 and 144 Fiber Counts
Available in Female (Pinless) and Male (Pinned) Connectors
Available in Type A, Type B, and Type C Polarities
Available in Pulling Eye to Prevent the Cables from Twisting During the Installation Process
Typically Used for Patching Within a Cabinet and Row
Compliant to IEC 61754-7, ANSI/TIA-604-5 and ANSI/TIA-568.3-D
Customized MTP-12 Push Pull Tab Jumper, 12-144F, OM4, LSZH Bunch, 0.35dB
MTP jumpers are high-density pre-terminated optical cabling that simplify installation and improve performance, designed to be a cost-effective alternative to time-consuming field termination. MTP jumpers, allow for the seamless migration to higher data rates in the data center when used in conjunction with our trunk cables. They are used to connect MTP adapter panels, fiber cassettes, and electronics, typically within a cabinet and row.
| Connector A | US Conec MTP® Push Pull Tab Female/Male | Connector B | US Conec MTP® Push Pull Tab Female/Male |
| Polish Type | UPC | Glass Fiber | Bend Insensitive Fiber |
| Fiber Mode | OM4 50/125μm | Wavelength | 850/1300nm |
| Trunk Outside Diameter (OD) | 3.0mm-17.3mm | Cable Jacket | LSZH |
| Connector Durability | 50 times | Minimum Bend Radius | 7.5mm |
| Insertion Loss | ≤0.35dB | Return Loss | ≥27dB |
| Attenuation at 850nm | ≤3.5dB/km | Attenuation at 1300nm | ≤1.5dB/km |
| Operating Temperature | -10 to 70°C (14 to 158°F) | Storage Temperature | -20 to 70°C (-4 to 158°F) |
*MTP is a registered trademark of US Conec Ltd. US Conec and FS.COM partner on supplying high performance MTP series products.
