US Conec MTP Connector with Optimal 0.35dB Low IL
G.657.A1 with 10mm Min. Bend Radius
Custom Polarities and Pins Available
Cable Jacket Available in OFNP and LSZH Flame Rating
For Longer Distances in Cabinet-to-Cabinet Applications
Compliant to IEC 61754-7, ANSI/TIA-604-5 and ANSI/TIA-568.3-D
Customized MTP-12 Harness, 8-144F, OS2, 0.35dB
The MTP harnesses allow for the seamless migration to higher data rates in the data center when used in conjunction with our trunks. They are typically used for patching within a cabinet. MTP cable, a cost-effective alternative to time-consuming field termination, is designed for high-density fiber patching in data centers which need space saving and reduce cable management troubles.
Due to the MTP-12 also supporting MTP-8 fiber systems, it is optimized for such as 40G QSFP+ PLR4 to 10G SFP+ LR, 400G OSFP/QSFP-DD DR4 to 100G QSFP DR and 400G OSFP/QSFP-DD XDR4 to 100G QSFP FR optics connection.
| Connector A | US Conec MTP® | Connector B | LC/SC/FC/ST |
| Fiber Mode | OS2 9/125μm | Wavelength | 1310/1550nm |
| Glass Fiber | G.657.A1 | Minimum Bend Radius | 10mm |
| Trunk Outside Diameter (OD) | 3.0mm-17.3mm | Breakout Outside Diameter (OD) | 2.0mm (Duplex), 2.0/0.9mm (Simplex) |
| MTP Connector IL | ≤0.35dB | Standard Connectors IL | UPC≤0.2dB, APC≤0.3dB |
| MTP Connector RL | ≥60dB | Standard Connectors RL | UPC≥50dB, APC≥60dB |
*MTP is a registered trademark of US Conec Ltd. US Conec and FS.COM partner on supplying high performance MTP series products.
